Instruction manual

INTUITY Messaging Solutions Release 4
MAP/5P Maintenance 585-310-186
Issue 3
October 1997
Common System Procedures
Page 3-22Restoring Backups
3
The system displays the header information for the tape. That information
includes:
■ Tape label
■ Date
■ List of packages (with release and version) installed on the
machine when the tape was made
■ Data types
The following is an example of tape header information:
PRODUCT_ID=2299999999
DATE=09/11/93 09:51
PKG=VM:0:R1.1
PKG=mtce:1.0:1.0-4
PKG=netw:0:1.0-4.3
PKG=vs:1.0:1.0-4
TYPE=System Data:
Press <Enter> to select data type.
Press <Esc> to terminate the restore.
5. Check the data types listed under
TYPE=System Data
to verify that this
tape contains the appropriate data.
If it does not,
a. Press .
b. Return to Step 3 above.
c. Try another tape.
If it does, continue with Step 6.
6. Press to continue.
The system displays the Restore window.
7. Enter
y
in the fields that display the data types you want to restore.
NOTE:
The fields displayed on the Restore window are based on the data
stored on the tape.
8. Enter n in all of the other fields.
9. Press (Save) to restore the data types selected.
10. Insert subsequent tapes if prompted.
ESC
ENTER
F3