Instruction manual

INTUITY Messaging Solutions Release 4
MAP/5P Maintenance 585-310-186
Issue 3
October 1997
Diagnostics
Page 2-63Conducting Diagnostics
2
1. Starting at the Lucent INTUITY Main menu (Figure 2-1), select
The system displays the Release of Voice Equipment window
(Figure 2-50
).
Figure 2-50. Release of Voice Equipment Window
The
New State:
field displays
inserv
(in service). This is the state that
the cards or channels selected will be changed to. This field can not be
changed.
2. Enter
card
or
channel
in the
Equipment:
field.
3. Enter the number of the card(s) or channel(s) you want to release in the
Equipment Number:
field.
Card numbers range from 0 through 10, channel numbers range from 0
through 63. The card and channel numbers can be entered in several
forms.
■ A single card number (for example: 1)
■ A range of card numbers (for example: 0-2)
■ A list of single card numbers (for example: 0,1,2)
■ A list of single cards and ranges (for example: 0-2)
> Release
> Voice Board Diagnostics
>
Diagnostics
> Customer/Services Administration