Instruction manual

INTUITY Messaging Solutions Release 4
MAP/5P Maintenance 585-310-186
Issue 3
October 1997
Diagnostics
Page 2-61Conducting Diagnostics
2
■ Channel number changed to state BROKEN
OR
Card number changed to state BROKEN
The channel or card is not working. Replace the Tip/Ring circuit card. See
“Tip/Ring Circuit Cards
” in Chapter 5, ‘‘Replacing or Installing Circuit
Cards’’.
Busying out a Tip/Ring Circuit Card
Busying out a Tip/Ring circuit card takes all channels on that card out of service
(MANOOS or manually out of service state) so that calls are not forwarded to
those channels You may also busy out one or more individual channels.
To busy out a Tip/Ring circuit card, do the following:
1. Starting at the Lucent I
NTUITY Main menu (Figure 2-1), select
The system displays the Busyout of Voice Equipment window
(Figure 2-49
).
Figure 2-49. Busyout of Voice Equipment Window
The New State: field displays manoos. This is the state to which the
cards or channels selected will be changed. This field cannot be
changed.
2. Enter card or channel in the Equipment: field.
> Busy Out
> Voice Board Diagnostics
>
Diagnostics
> Customer/Services Administration