Instruction manual

INTUITY Messaging Solutions Release 4
MAP/5P Maintenance 585-310-186
Issue 3
October 1997
Diagnostics
Page 2-57Conducting Diagnostics
2
■ ring detection
■ speed control
■ touch tone receive
■ touch tone transmit
NOTE:
The gain control, loop current/dial tone detection, manipulation of
hook state, ring detection, speed control, touch tone receive, and
touch tone transmit test types will be run during a voice port loop
around test regardless of the entry in the
Test Type:
field.
5. Enter
no
in the
Immediate Diagnose?
field.
If you enter
yes
in this field the diagnosis will be performed immediately
regardless of the current state of the dialing channel.
6. Press (Save).
The system completes the diagnostics and displays the Voice Port Loop
Around Test Results screen (Figure 2-47
).
Figure 2-47. Voice Port Loop Around Test Results Screen
7. Press .
The system displays the Voice Port Loop Around Test window
(Figure 2-46
).
F3
Voice Port Loop Around Test Results
manipulation of hook state pass
gain control pass
speed control pass
ring detection pass
touch tone transmit pass
play pass
touch tone receive pass
record pass
fax receive pass
fax transmit pass
loop current/dial tone detection pass
Press Enter to continue.
ENTER