Instruction manual

INTUITY Messaging Solutions Release 4
MAP/5P Maintenance 585-310-186
Issue 3
October 1997
Diagnostics
Page 2-56Conducting Diagnostics
2
1. Starting at the Lucent INTUITY Main menu (Figure 2-1), select
The system displays the Voice Port Loop Around Test window
(Figure 2-46
).
Figure 2-46. Voice Port Loop Around Test Window
2. Enter a channel number in the
Dialing Channel:
field.
The dialing channel is the channel which sends the signal used to
diagnose the target channel.
3. Enter the number of the channel you want to diagnose in the
Target
Channel:
field.
4. Enter a test type in the
Test Type:
field.
The following tests can be run on the voice port:
■ all
■ code
■ fax receive
■ fax transmit
■ gain control
■ loop current/dial tone detection
■ manipulation of hook state
■ play
> Voice Port Loop Around Test
>
Diagnostics
> Customer/Services Administration