- Eicon Technology DIVA Mobile PC Card User's Guide Model Number 800-241
Table Of Contents
- DIVAMobile PC Card
- Contents
- Getting Started
- Introduction
- Packaging
- Requirements
- Installation
- Installation of the DIVA Mobile PC Card
- Software Installation under Windows 95
- Software Installation under Windows 95 OEM Software Release 2 (OSR2)
- Using the ISDN Setup Wizard
- V.34 Modem Country Selector
- Checking the configured components
- Connecting to the ISDN / analog Network
- Changing SPIDs and ISDN Numbers
- Removing
- Applications
- Solving Problems
- Commands, Codes, and Protocols
- Technical and Regulatory Information
36 DIVA Mobile User’s Guide
Caller ID Commands
Italicized n or x denotes options to be supplied by user or software.
S-Register Summary
Default values are in decimal format.
Command Function Default
#CID=n Enable/disable Caller ID and format #CID=n
Register Function Default
S0 Rings to Auto-Answer 0
S1 Ring Counter 0
S2 Escape Character 43
S3 Carriage Return Character 13
S4 Line Feed Character 10
S5 Backspace Character 8
S6 Wait Time for Dial Tone 2
S7 Wait Time for Carrier 50
S8 Pause Time for Dial Delay Modifier 2
S9 Carrier Detect Response Time 6
S10 Carrier Loss Disconnect Time 14
S11 DTMF Tone Duration 95
S12 Escape Prompt Delay 50
S14 General Bit Mapped Options Status 138 (8Ah)
S16 Test Mode Bit Mapped Options Status (&T) 0
S18 Test Timer 0
S19 AutoSync Options 0
S20 AutoSync HDLC Address or BSC Sync Character 0
S21 V.24/General Bit Mapped Options Status 52 (34h)
S22 Speaker/Results Bit Mapped Options Status 117 (75h)
S23 General Bit Mapped Options Status 62 (36h)
S24 Sleep Inactivity Timer 10
S25 Delay to DTR Off 5
S26 RTS-to-CTS Delay 1