- Eicon Technology DIVA Mobile PC Card User's Guide Model Number 800-241
Table Of Contents
- DIVAMobile PC Card
- Contents
- Getting Started
- Introduction
- Packaging
- Requirements
- Installation
- Installation of the DIVA Mobile PC Card
- Software Installation under Windows 95
- Software Installation under Windows 95 OEM Software Release 2 (OSR2)
- Using the ISDN Setup Wizard
- V.34 Modem Country Selector
- Checking the configured components
- Connecting to the ISDN / analog Network
- Changing SPIDs and ISDN Numbers
- Removing
- Applications
- Solving Problems
- Commands, Codes, and Protocols
- Technical and Regulatory Information
30 DIVA Mobile User’s Guide
Hot Swapping (Modem Removal) Problems
In general, you can remove and reinsert DIVA Mobile while the PC is on.
Some applications, however, do not support “hot swapping”; problems may
occur if you remove the DIVA Mobile while the PC is on.
Note: Before removing DIVA Mobile close all applications which are using
the adapter.
In order to correctly remove DIVA Mobile during operation follow these
steps:
1 Click the PC Card icon on the Taskbar next to the Windows 95 clock.
The PC Card (PCMCIA) Properties dialog box opens; it displays a list
of PCMCIA devices (in the Socket Status tab).
2 Select Eicon DIVA Mobile ISDN-V.34 combo card from the list of
PCMCIA devices.
3 Click Stop. The following message will appear:
“You may safely remove this device”.
4 Click OK. You can now remove the device.
If DIVA Mobile is not immediately detected after reinserting it into the PC
Card slot, reboot your system.