Specifications

Remove the backings from the two large labels suppl ied and
place them on the
outside surface of the bottom plate. See figure
4 for placement of small label.
SERVICE
cepted for repair. Instruments that
show evidence of acid core solder or paste
fluxes will be returned not repaired.
NOTE:
Before returning this unit, be
sure all parts are securely
mounted. Attach a tag to the
instrument, giving
your home address and the trouble with
the unit. Pack very carefully in a
rugged container, using sufficient packing material (cotton, shredded
news-
paper, or excelsior), to make the unit completely
immovable within the con-
tainer. The origInal shipping carton is satisfactory, providing the original
inserts are used or sufficient packing material
Is inserted to keep the instru-
ment immovable. Ship by prepaid
Railway Express, if possible, to the
Elec-
tronic Instrument Co. , Inc., 33-
00 Northern Blvd., L.
C. 1, New York. Re-
turnshipmentwill be made by express collect.
Note that the carrier cannot be
held liable for
damages in transit if packing,
IN HIS OPINION, is insufficient.
If you are still having difficulty, write to our service
department listing all
possible indications that might be helpful.
If desired, you may return the in-
strument to our factory where it will be
placed in operating condition for $12.
plus the cost of
parts replaced due to their being
damaged in the course of
construction. This service policy applies only
to completed instruments con-
structed in accordance with the
instructions as stated in the manual.
Instru-
ments that are not completed or instruments that are modified
will not be ac-