Specifications

ManualsBrandsEico ManualsPortable Generator378

9. J)

Fig. 2. Strip back the outer

insulation 1 1/2" from one

end of a 10"

piece of 3 conductor shielded cable. Twist

the shield strands together and

cover with a 1 1/4" piece of thick spaghetti. Cut the

brown lead to

1 1/4"

the red lead to 3/4" and the orange lead to I"

. Strip

back the insulation 1/4"

from the end of each of these leads.

Connect the brown lead to SlB-6 (S2),

the red lead to S

1 B-8 (S 1), the orange lead to S 18-9 (S 1) and the twisted

shield strands to S lA-

10 (C). On the other end of the same piece of shielded

cable, strip the outer insulation back 3/4"

. Twist the shield strands together.

Strip

k the in,ulaHon 1/4" fwm the end af each af the inne, conduct"".

This en

of the cable does not get connected unti I later.

10.

iJ IF; g.

2. Connect one end of 0 3 1/2" piece of block wi 'e to

5 IA - 10 (52).

11. (

Fig. 2. Strip back the outer insulation

1 3/4" from one end of a l0"

piece of the4 conductor shielded cable. Twist the shield

strands together and

cover with a 1 1/2" piece of thick spaghetti Cut the

brown, red and orange

leads to 3/4" each and the yellow lead to

1 1/4" Strip back the insulation

1/4" from the end of each of thes~ leads.

Connect the

brown lead to SlD-

(SI),

the red lead toS1D-

9(Sl), the orange lead toSlD-

10(S1)and the yello

lead- to S 10- 11 (C).

Connect a 1" piece

of bare wire from S ID- l1 (S2) to S 1 E-

(S 1). Connect

the twisted shield strands' to S lC-

6 (C). On the other end of the

U'I same piece of shield cable, strip the outer insulation

back 1 1/4". Twist the

shield strands. Cut the red, orange

, and yellow leads to 1" . Cut the

shield

strands to 3/4". Strip back the insu lation 1/4" from the end of each of the

inner

conductc?rs. This end of the cable does not get connected until

later.

12.

N.)

Fig. 2.

Strip back the insulation 1 3/4" from

one end of a 9 1/2"

piece of 3 conductor shield cable. Twist the shield

strands together and cover

wIth a 1 1/2" piece of thick spaghetti. Cut the

brown and red leads to 3/4"

and the orange lead to 1"

. Strip

back the insulatIon 1/4" from the end of

each

of these leads. Connect the orange lead to

S 1 F- 12 (S 1), the red lead to S 1 F- l 0

(Sl), the brown lead to SlF-9(Sl) and the twisted shield strands to SlF-

6 (C).

On the other end of the same piece of shielded cable, strip the outer insulation

back 1 1/4"

. Twist the shield strands. Cut the

shield strands, red lead and

oran~e lead to 3/4" and the brown lead to 1"

. Strip back the insulation 1/4"

from f~e e

?d of each of the inner conductors. This end of the cable does not

get co~neqted until later.

13. ~~F!~ 2. Connect one end

of a 4 1/2" piece of black wire to SlF-6(C).

, /i

V I

(V)\.Fi

S 1 F-6 (Si3)

2. Connect a

1 1/2" piece of bare wire from SlC-

6 (S2) to

15. (,)

Fig. 2. Strip back the outer

insulation 1 1/4" from one end of a

7 1/2" piece of 3 conductor shield cable.

Twist the shield strands together,

and cover with a 1" piece of thick spaghetti. Cut the orange

and red leads to

3/4" and the brown lead to 1"

. Strip the insulation

back 1/4" from this end of

each of these leads. Connect the orange lead to S IH-I0 (S

1), the red lead to

SlH-9(S1), the brown lead to SlH-

7(S2)and the shield strands toS1H-

ll (C).

On the other end of the same piece of shielded cable, strip the outer Insulation

back 3/4"

. Twht the

shield strands together. Strip back the insulation 1/4"

from the end 9feuch of the inner

conductors. This end of the cable does not

get conne ~'d unti

I later.

16. ~.

. ~

rg.

2. Connect one end of

a 2" piece of black wire to S

1 H- l1 (S2).

17.

Fig. 2.

- Connect one end of a 2 1/2"

piece of grey wire to S 18-

11 (S 1).

18. V) Fig. 2. On one end of a 4 1/2" piece of single

conductor shielded

cable, strip the outer insulating back 1/2"

. Twist the shield strands together

and cut off:

Strip back the inner insulation 1/4" and connect to S18-

5 (Sl).

On the other end of the same piece of shielded cable, strip back the outer in-

sulation3/4"

; Twist the shield strands together. Strip

back the inner insulation

1/4"

. Jhis end of the cable does not get

connected until later.

19.

(v)

fig. 2. Connectoneendofa5"

pieceofbrownwiretoS1D-

7(S1).

20. (

'Fig.

2. Connect one end of a

3" piece of brown wire to SlF-

8 (SI).

21. (

Fig. 2. On one of a 4" piece of

single conductor shielded cable,

strip the outer insulated back 1/2"

. Twist the shield strands together and cut

off. Strip back the inner insulation 1/4" and connect to SlG-6(Sl).

On the

other end of the same piece of cable,

strip the outer insulation back 3/4"

Twist the shield strands together.

Strip back the inner insulation 1/4"

. This

end of t~e cable does not get connected until later.

22. (

Fig. 2.

Connect one end of a 3" piece of grey wire to S 1 G-

12 (S 1).

23. (~/Fig.

2. Connect

one end of a 5" piece of grey wire to SlD-

3 (Sl)

and one end of a 5" piece of yellow wire to SlE-

4 (Sl). Twist

the two leads

together. .

24. (

v) Fig. 2. Connect one end of a 4 1/2" piece of

green wire to S 1C-2 (S 1)

and one end of a 4 1/2"

piece of blue wire to S lC-4 (S2). Twist the two

leads tog/

ether.

25 (

vfFi9. 2. Connect one end of

a 5 1/2" piece of brown wire to

S 1 E-

3 (S 1)

and one end of a 5 1/2" piece of white wire to SlF-

5 (S2). Twist the two

leads together.