Installation & Assembly

ZOOM
Turn off the electricity supply at the main circuit panel before installing.
Do not connect the electricity supply until your luminaire is fully
assembled and installed.
Fix the ceiling bracket (A) to the ceiling by using mounting plugs and
screws suitable to your ceiling type.
Place or hold the lamp in an elevated position in such a way that the
wires can freely reach the ceiling junction box.
Connect the 3 power wires according to their colours. Brown is the live
wire, blue is the neutral wire, green/yellow is the earth wire.
Screw the suspension eye (with retaining nut attached) (B) to the ceiling
bracket and fix it securely by tightening the retaining nut.
Check whether the connection is sufficiently strong by manually loading
the chain. Carefully lower the lamp until the chain is taut. Straighten the
chain links.
Place the bulbs (not included).
CARE INSTRUCTION
Wipe clean with soft, dry cloth.
Always avoid the use of harsh chemicals or abrasive cleaners as they may
cause damage to the fixture’s finish.
1
A
B
CEILING
Hang the glass decorations (E) on the lamp one by one.
ASSEMBLY INSTRUCTION
1
09491 CHANDELIER PULSAR
Eichholtz B.V. l Delfweg 52 l 2211 VN Noordwijkerhout l P.O. Box: 23, 2160 AA Lisse l The Netherlands l www.eichholtz.com