Installation & Assembly

ASSEMBLY INSTRUCTION
Eichholtz B.V. l Delfweg 52 l 2211 VN Noordwijkerhout l P.O. Box: 23, 2160 AA Lisse l The Netherlands l www.eichholtz.com
1 2
3
FINAL
CARE INSTRUCTION
Wipe clean with soft, dry cloth.
Always avoid the use of harsh chemicals or abrasive cleaners
as they may cause damage to the fixture’s finish.
Turn off the electricity supply at the main circuit panel before installing.
Do not connect the electricity supply until your luminaire is fully assembled
and installed.
Fix the ceiling bracket to the ceiling by using mounting plugs and screws
suitable to your ceiling type.
Place or hold the lamp in an elevated position in such a way that the wires
can freely reach the ceiling junction box.
Thread the wires through the components (suspension eye, retaining nut,
ceiling canopy) and connect the 3 power wires according to their colours.
Brown is the live wire, blue is the neutral wire, green/yellow is the earth wire.
Screw the suspension eye (with retaining nut attached) to the ceiling
bracket and fix it securely by tightening the retaining nut.
Check whether the connection is sufficiently strong by manually loading
the chain. Carefully lower the lamp until the chain is taut. Straighten the
chain links.
Two pieces spare glass are included with each lamp.
1 12070 CHANDELIER OPERA
A
B
C
D
CEILING