Installation & Assembly

ASSEMBLY INSTRUCTION
Eichholtz B.V. l Delfweg 52 l 2211 VN Noordwijkerhout l P.O. Box: 23, 2160 AA Lisse l The Netherlands l www.eichholtz.com
1
FINAL
2
ZOOM
CARE INSTRUCTION
Wipe clean with soft, dry cloth.
Always avoid the use of harsh chemicals or abrasive cleaners
as they may cause damage to the fixture’s finish.
Two people are required for safe mounting of this luminaire.
Turn off the electricity supply at the main circuit panel before installing.
Do not connect the electricity supply until your luminaire is fully assembled
and installed.
Fix the ceiling bracket (A) to the ceiling by using mounting plugs and
screws suitable to your ceiling type.
Remove the lamp from the carton by lifting the bar. Hold the luminaire in
the air while removing the protective packaging materials. Do not put the
luminaire down as it might damage the acrylic parts.
The luminaire is attached to the bar by an extra ceiling bracket. Remove
the ceiling bracket.
Connect the 3 power wires according to their colours . Brown is the live
wire, blue is the neutral wire, green/yellow is the earth wire.
Place the luminair over the ceiling bracket and fix it securely by tightening
the nuts (C) on the screw threads of the ceiling bracket.
111840 CEILING LAMP HYÈRES
A