Installation & Assembly

2
4
1
3
5
ASSEMBLY INSTRUCTION
Eichholtz B.V. l Delfweg 52 l 2211 VN Noordwijkerhout l P.O. Box: 23, 2160 AA Lisse l The Netherlands l www.eichholtz.com
1
12732 CEILING LAMP AXEL
Turn off the electricity supply at the main circuit panel before installing.
Do not connect the electricity supply until your luminaire is fully assembled
and installed.
Fix the ceiling plate to the ceiling by using mounting plugs and screws
suitable to your ceiling type.
Connect the 3 wires according to their colours. Brown is the live wire, blue
is the neutral wire, green/yellow is the earth wire.
Place the lamp over the ceiling plate and fix it securely with the four nuts.
Place the bulbs.
Place the five glass squares by carefully sliding them inside the lamp in a
diagonal position and turning them back once inserted.