Installation & Assembly

ASSEMBLY INSTRUCTION

Eichholtz B.V. l Delfweg 52 l 2211 VN Noordwijkerhout l P.O. Box: 23, 2160 AA Lisse l The Netherlands l www.eichholtz.com

TWO PEOPLE ARE REQUIRED FOR SAFE MOUNTING

OF THIS LUMINAIRE

1. Carefully unpack all ﬁxture parts and hardware from the carton and

check material thoroughly before disposing of box and packing.

2. Turn off the electricity supply at the main circuit panel before installing.

Do not connect the electricity supply until your luminaire is fully

assembled and installed.

3. Fix the ceiling bracket (A) to the ceiling by using mounting plugs and

screws suitable to your ceiling type.

4. Place or hold the lamp in an elevated position in such a way that

the wires can freely reach the ceiling junction box. Thread the wired

through the components (suspension eye, retaining nut, ceiling

canopy) and connect the 3 power wires according to their colours.

Brown is the live wire, blue is the neutral wire, green/yellow is the

earth wire. Tighten the retaining nut (B).

5. Hang the lamp holder hub (C) from the chain hook (D) and then hang

the Rods (E) with the four hooks at the top of holder hub.

6. Put glass (F) into the ring (G) and hang it up on all rods with the four

hooks on ring.

7. Adjust the spider (H) at the level of ring (G) and tighten the nut with

pliers to ensure the spider will stay in the right position. It will stop the

movement of holder hub and prevent the glass from breakage.

109238 LANTERN CAMERON M

1 ZOOM

CEILING