Installation & Assembly

ASSEMBLY INSTRUCTION
Eichholtz B.V. l Delfweg 52 l 2211 VN Noordwijkerhout l P.O. Box: 23, 2160 AA Lisse l The Netherlands l www.eichholtz.com
PARTS
1 2
FINAL
The assembly is now complete and can be mounted on the wall with the
help of 8 screws K provided in the components.
106051 COATRACK HUDSON S
F
I
J
J
2x
I K
J
5x
6x 8x 8x
H
4x 1x
GE F C
1x
A
1x
B
4x
A
B
D
E
1x
D
Put left bracket A and the right bracket B on the floor standing on their
base. Insert square pipe D loaded with hooks G and hangers H to the
square slots in both the brackets.
Take first iron bar F and insert it from other side starting from one
bracket and continue till the other end is visible from the other side of
bracket into square pipe through slots in the both sides of brackets.
Loosely fasten screw nuts J on the end of bar which is visible from
outer side of bracket.
Take four round pipes E and insert them into the slots in both the
brackets one by one. Take first iron bar E and insert it from other side
starting from one bracket and continue till the other end is visible from
the other side of the other side of bracket
Screw and loosely fasten nut I on the end of the bar which is visible
from outer side of the bracket. Now once all the pipes and nuts are in
place, tightly fasten all nuts on all ends.
GH
K
8x