Installation & Assembly

ASSEMBLY INSTRUCTION

Eichholtz B.V. l Delfweg 52 l 2211 VN Noordwijkerhout l P.O. Box: 23, 2160 AA Lisse l The Netherlands l www.eichholtz.com

WALL PLATE (A)MIDDLE GLASS PLATE

Turn off the electricity supply at the main circuit panel before installing.

Do not connect the electricity supply until your luminaire is fully assembled

and installed.

Fix the wall bracket to the wall by using wall mounting plugs and screws

suitable to your wall type.

Open the wire connector and connect the 3 wires according to their

colours . Brown is the live wire, blue is the neutral wire, green/yellow is the

earth wire.

Place the lamp over the wall bracket and ﬁx it securely with the screws

supplied.

Move the middle glass up to be able to place the bulb.

CARE INSTRUCTION

Wipe clean with soft, dry cloth.

Always avoid the use of harsh chemicals or abrasive cleaners

as they may cause damage to the ﬁxture’s ﬁnish.

1 11999 WALL LAMP MONTICELLO

WALL PLATE (A)

SCREWS

PARTS

LAMP

WALL PLATE (A)

SCREWS (B)

PAGE 1
ASSEMBLY INSTRUCTION 111999 WALL LAMP MONTICELLO PARTS SCREWS (B) WALL PLATE (A) 1 LAMP 2 WALL PLATE (A) SCREWS 3 MIDDLE GLASS PLATE WALL PLATE (A) Turn off the electricity supply at the main circuit panel before installing. Do not connect the electricity supply until your luminaire is fully assembled and installed. Fix the wall bracket to the wall by using wall mounting plugs and screws suitable to your wall type. Open the wire connector and connect the 3 wires according to their colours .