Installation & Assembly

ASSEMBLY INSTRUCTION
Eichholtz B.V. l Delfweg 52 l 2211 VN Noordwijkerhout l P.O. Box: 23, 2160 AA Lisse l The Netherlands l www.eichholtz.com
Turn off the electricity supply at the main circuit panel before installing.
Do not connect the electricity supply until your luminaire is fully assembled
and installed.
Fix the ceiling plate (A) to the ceiling by using mounting plugs and screws
suitable to your ceiling type.
Place the luminaire in an elevated position in such a way that the wires can
freely reach the ceiling junction box.
Thread the wires through the components and connect the 3 power wires
according to their colours (B). Brown is the live wire, blue is the neutral
wire, green/yellow is the earth wire.
Place the ceiling canopy (C) over the ceiling bracket and fix it securely with
the 3 nuts supplied (D).
Hang the luminaire from the ceiling canopy with chains.
111106UL CHANDELIER CARDUCCI
CEILING
A
B
C
D