Installation & Assembly

ASSEMBLY INSTRUCTION

Eichholtz B.V. l Delfweg 52 l 2211 VN Noordwijkerhout l P.O. Box: 23, 2160 AA Lisse l The Netherlands l www.eichholtz.com

CROSSBAR (A)

PARTS

1 2

SCREWS

CROSSBAR (A)

ALLEN SCREWS ALLEN KEY

LAMP

111609 WALL LAMP WINDOLF

Turn off the electricity supply at the main circuit panel befor installing.

Do not connect the electricity sypply until your luminaire is fully assembled

and installed.

Fix the crossbar (A) to the wall by using wall mounting plugs and screws

suitable to your wall type.

Connect the 3 power wires according to their colours. Brown is the live

wire, blue is the neutral wire, the green/yellow wire is the earthwire.

Place the lamp over the cross bar and ﬁx it securely with the allen screws.

CARE INSTRUCTION

Wipe clean with soft, dry cloth.

Always avoid the use of harsh chemicals or abrasive cleaners as they may

cause damage to the ﬁxture’s ﬁnish.

ALLEN SCREWS

SCREWS

CROSSBAR (A)

EARTH WIRE

PAGE 1
ASSEMBLY INSTRUCTION 111609 WALL LAMP WINDOLF PARTS CROSSBAR (A) SCREWS LAMP ALLEN SCREWS ALLEN KEY 1 2 CROSSBAR (A) EARTH WIRE LAMP SCREWS CROSSBAR (A) Turn off the electricity supply at the main circuit panel befor installing. Do not connect the electricity sypply until your luminaire is fully assembled and installed. ALLEN SCREWS CARE INSTRUCTION Wipe clean with soft, dry cloth. Always avoid the use of harsh chemicals or abrasive cleaners as they may cause damage to the fixture’s finish.