Installation & Assembly

ASSEMBLY INSTRUCTION
Eichholtz B.V. l Delfweg 52 l 2211 VN Noordwijkerhout l P.O. Box: 23, 2160 AA Lisse l The Netherlands l www.eichholtz.com
2
3
Turn off the electricity supply at the main circuit panel before installing. Do
not connect the electricity supply until your luminaire is fully assembled
and installed.
Fix the crossbar (A) to the wall by using wall mounting plugs and screws
suitable to your wall type.
Connect the 3 wires according to their colours. Brown is the live wire, blue
is the neutral wire, green/yellow is the earth wire.
Place the lamp over the cross bar and fix it securely with the nuts (B)
supplied.
Place the cover (C) over the lamp and secure it by first placing the bottom
cap (D) and securing it with the finial (E). Finally place the top cap and
secure the it with the finial.
ZOOM
CARE INSTRUCTION
Wipe clean with soft, dry cloth.
Always avoid the use of harsh chemicals or abrasive cleaners
as they may cause damage to the fixture’s finish.
A
B
B
C
D
E
111306 WALL LAMP GLORIOUS (H. 52 CM)