Installation & Assembly

ASSEMBLY INSTRUCTION
Eichholtz B.V. l Delfweg 52 l 2211 VN Noordwijkerhout l P.O. Box: 23, 2160 AA Lisse l The Netherlands l www.eichholtz.com
111381 WALL LAMP CREED
PARTS
21
FINAL
SCREWS
CROSSBAR (A)
Turn off the electricity supply at the main circuit panel before installing.
Do not connect the electricity supply until your luminaire is fully assembled
and installed.
Fix the crossbar (A) to the wall by using wall mounting plugs and screws
suitable to your wall type.
Connect the 3 power wires according to their colours. Brown is the live
wire, blue is the neutral wire, the green/yellow wire is the earthwire.
Place the lamp over the cross bar and fix it securely with the screws.
C
ARE INSTRUCTION
Wipe clean with soft, dry cloth.
Always avoid the use of harsh chemicals or abrasive cleaners as they may
cause damage to the fixture’s finish.
SCREWS
CROSSBAR (A)
CROSSBAR (A)
SCREWS