User Manual

11
Technical Data
Diamond Wet Drill END 712 P
Rated voltage:
110 V ~
230 V ~
Power input:
700 W
700 W
Rated current:
6.5 A
3.1 A
Order number.
03016000
03015000
Order number Set:
0301R000
Frequency: 40/60 Hz
Max. drilling diameter: 12 mm
Spindle connection: M 12 x 1.5
Load speeds: 0 - 8000 rpm
Protection class: II
Degree of protection: IP 20
Weight: about 2.6 kg
Interference suppression: EN 55014 and EN 61000
Supply
Diamond Wet Drill with PRCD protective switch integrated in the cable, side
handle with depth gauge, mounting tools and operating instructions in a
metal case.
Available add-ons:
Item
Order No.
Centering device with drilling template
3583A000
Diamond drill bits, length 60mm
M 12 x 1,5; 3,5 – 12 mm
Diamond core drill bits, length 60mm
M 12 x 1,5; 6 – 14 mm
Diamond drill bits, length 150mm
M 12 x 1,5; Ø 6 - 12 mm
Sharpening block
35910000
Water tank 5l
35811000
Application for Indented Purpose
Together with special wet drill bits, the END 712 P is made for drilling tiles,
granite, marble, natural stone etc. from 3.5 – 12 mm diameter. The
diameter of the drill bits should not exceed 12 mm.
The work spindle of the machine has a M 12 x 1.5 – external thread.
Keep threads and front surface clean.
Please hold up with a jaw wrench SW 13 to remove the drill bits.