User Manual

13
Technical Data
Diamond Core Drill EHD 1801
Rated voltage: 230 V ~ 110 V ~
Power input: 1800 W 1600 W
Rated current: 8,3 A 15,5 A
Order Number 0331U 0331V
Frequency: 50-60 Hz
Max. drilling diameter: 250 mm
Rated speed: 0-550 min
-1
Bit holder: M 18
Collar diameter: 53 mm
Protection class: II
Degree of protection: IP 20
Weight: ca. 5,7 kg
Interference suppression acc.to: EN 55014 und EN 61000
Subject to technical changes!
Supply
Diamond core drill, manual, transport case
Application for Indented Purpose
The diamond core drill EHD 1801 is indented only for professional use and
may be used only by instructed personnel.
With an Dust Extraction and an appropriate drill bit, the tool can be used for
cutting of bricks, sand-lime bricks and pore concrete (not for concrete,
stone).
Safety Instructions
Safe use of the tool is only possib
le if the user had
studied the instruction manual and safety instructions
completely and is strictly following the instructions
contained therein.
Additionally, the general safety instructions of the leaflet
supplied with the tool must be observed. Prior to the first
use, the user should absolve a practical training.