User Manual

without notice to amend the technical information and specifications.

SUSHI datasheet

(SUSHI-DS, SUSHI-RB, SUSHI-RJ)

Date 3 June 2017

First instructions to use SUSHI

1) download software from our web site

www.dmxsoft.com or www.arcolis.com

2) start software setup

make sure to select "Install drivers"

3) with the USB cable, plug the SUSHI to the PC

windows detects the interface

4) start the software, if the SUSHI is recognized

a small windows appears

Driver for Windows

USB driver is automatically installed during the software setup.

We advice to install the software before to plug the USB interface.

Software for Windows

Easy Stand Alone 1 + Daslight DVC 1 + Sunlite 2004 + Lumidesk lite

(free download from www.dmxsoft.com or www.arcolis.com)

Important notes for Apple Mac users. Out of the package :

- SUSHI-DS, SUSHI-RB/RJ and myDMX AMIGO controllers do not include any Mac software.

- myDMX BUDDY controller includes a limited Mac version of myDMX 2 software. (No 3D visualizer,

No Easy Remote or No Midi features)

More software (upgrades) are available on https://store.dmxsoft.com

PAGE 1
© Nicolaudie Group 2014-2017. All rights reserved. We reserve the right without notice to amend the technical information and specifications. SUSHI datasheet (SUSHI-DS, SUSHI-RB, SUSHI-RJ) Date 3 June 2017 First instructions to use SUSHI 1) download software from our web site www.dmxsoft.com or www.arcolis.
PAGE 2
Technical Data Input Power: 5V DC 0.
PAGE 3
Replacing the DMX chip If the USB DMX interface is being recognized by the software but you have no DMX output, it may be possible to resolve this issue by replacing the DMX chip. We are aware that some SUSHI interfaces have been assembled with a DMX chip coming from a different supplier that seems to be of a lower quality. This could be the reason for your problem. The bad reference is MAXIM EPA 1327.