Use and Care Manual
56-VOLT LITHIUM-ION CORDLESS 15" STRING TRIMMER28
Install the new trimmer head
1. Position the ange removed in step
6 of the “remove the trimmer head”
section onto the motor shaft with
the at surface facing away from
the base (Fig. 27).
2. Align the mounting hole in the
spool base with the motor shaft and
mount the base onto the shaft
(Fig. 28).
3. Position the plain washer onto the
motor shaft (see Fig. 24).
27
Flat surface facing
away from the base
28
Spool Base