Use and Care Guide

56-VOLT LITHIUM-ION CORDLESS 15" STRING TRIMMER 27
Install the new trimmer head
1. Ensure that the ange is on the
motor shaft with its at surface
facing outward (Fig. 24).
2. Mount the upper cover and spool
onto the motor shaft and pre-tighten
them with the nut (see Fig. 23).
Use an impact socket wrench(1/2",
13mm) to securely tighten them, in
the clockwise direction.
3. Mount the lower cover assembly, with the spring located inside
(see Fig. 19 & 20).
4. Follow the instructions in section" LINE REPLACEMET" to mount the trimmer
line.
24
Flat surface facing
away from the base