Use and Care Guide

56-VOLT LITHIUM-ION CORDLESS 15" STRING TRIMMER26
Remove the trimmer head
1. Hold the trimmer head, use one
thumb to press one release tab on
either side while gently pulling on
the lower cover assembly with the
other hand to release the tab
(see Fig. 16).
2. Repeat on the other side to release
the other release tab from the
trimmer head and remove the lower
cover assembly with the spring from
the trimmer head (see Fig. 17 & 18).
3. Wear gloves to hold the upper cover
with one hand and, with the other
hand, use an impact socket wrench
(1/2" , 13mm) to loosen the nut
(Fig. 22).
4. Remove the nut, spool, and upper
cover, in that order. Save the ange
on the motor shaft for reassembly
(Fig. 23).
22
Nut
23