Product Manual

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2400/SNT2400-FC22

AUIGER-SWITCH TRIGGER AND

SELF-PROPEL TRIGGER LINKAGE

(Fig. 15)

When you activate the self-propel trigger

and the auger-switch trigger at the same

time, the auger-switch trigger will be

temporarily locked. Release the auger-

switch trigger (right hand) and the auger-

switch trigger will remain engaged. This feature allows you to adjust the auger speed,

self-propelling speed, and discharging direction of the snow while the auger rotates.

To stop the auger, release the self-propel trigger and both the auger and the self-propel

function will stop.

CHUTE AND DEFLECTOR

ADJUSTMENT

Loose/Tighten The Snow-Discharge

Chute

If you encounter heavy snow, wet snow,

ice snow, you can adjust the chute tightly

according to your needs.

The inline cable adjuster can change

the move force of the chute-rotation

handle as you wish,you can reduce the

force by rotating the inline cable adjuster

counterclockwise slightly (Fig. 16).

Conversely, the force will add by turning it in the opposite direction. Be noted that the

snow discharge chute will drift left/right during use if it is too loose.

Adjust The Direction of Snow-Discharge Chute.

The chute can be adjusted to change both the direction and the distance of the

discharged snow to assist you in moving snow away from one area and placing it in

another.

The direction of snow removal can be adjusted up to left 100° and right 100° (Fig.16).

1. Pull the chute-rotation handle to the left to rotate the chute to the left.

2. Pull the chute-rotation handle to the right to rotate the chute to the right.

Auger-Switch Trigger

Self-Propel Trigger

Tight

Loose

Tight

Chute-Rotation Handle

Snow-Discharge Chute

Nut

Swivel Nut