Use and Care Manual

56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC 39
NOTICE: If the bolt rotates with the
motor shaft when loosening the bolt,
place another metal rod (e.g., a 3.5" long
screw bit) with diameter less than 1/4
inch (6.35mm) into the aligned holes in
the fan to act as another stabilizer
(Fig. 22).
5. Remove the outer bolt, ange, blade
set and fan from the shaft (Fig. 23).
6. Use a 9/16" (14mm) wrench to turn
the two nuts counterclockwise to
loosen them and then disassemble
the two blades (Fig.24).
NOTICE: Save the two bolts and two
nuts for blade reassembly.
7. Sharpen the blades or replace with
a new blade set.
THIS SIDE FACING GRASS
22
Stabilizer 1
Stabilizer 2
THIS SIDE FACING GRASS
23
Shaft
Fan
Blade Set
Flange
Outer Bolt
THIS SIDE FACING GRASS
24
Bolt
Nut