Use and Care Guide

56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC42
4. Mount the washer and shaft bolt
and nger tighten the bolt (Fig. 30).
5. Mount the “Blade Set” nuts and
nger tighten them with the “Blade
Set” bolts behind (Fig. 31).
6. Insert a manual screwdriver or
metal rod 5/16” (8 mm) or less in
the stabilizer hole. This is to stop the
blade from rotating while tightening
the bolt/nuts (Fig. 32).
7. Use a torque wrench with 9/16”
(14mm) socket to tighten shaft bolt
in CLOCKWISE direction to 22 ft-lb
(30 N.m.) and alternate to 11/16”
(17mm) socket to tighten “Blade
Set” nuts in CLOCKWISE direction
to 36-43 ft-lb (50-60 N.m.).
THIS SIDE FACING GRASS
32
THIS SIDE FACING GRASS
31
“Blade Set” Nuts Finger Tightened
THIS SIDE FACING GRASS
30
Shaft Bolt
Washer