Use and Care Guide
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC 39
5. Use a 9/16" (14mm) wrench to
loosen and remove the 9/16” shaft
bolt and washer (Fig. 23).
NOTICE: If the shaft bolt rotates with
the motor shaft during loosening, place
another metal rod (e.g., a 3.5" long
screw bit) with diameter less than 1/4"
(6.35mm) into the smaller hole in the fan
to act as another stabilizer (Fig. 24)
6. Remove the mulching lower blade
and the upper blade from the motor
shaft in sequence (Fig. 25). Remove
the two “Blade Set” bolts from the
upper blade. SAVE THE TWO BOLTS
FOR LATER BLADE REASSEMBLY.
7. Save the fan on the motor shaft.
Be sure that the fan blade is facing
towards the deck (Fig. 26).
23
Washer
Shaft Bolt
24
Stabilizer 1
Stabilizer 2
25
Upper Blade
“Blade
Set” Bolts
Mulching
Lower
Blade
Fan
26
Fan Blade
Fan