Use and Care Guide
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC26
SPRING-LOADED CUTTING-HEIGHT ADJUSTMENT (Fig. 12)
WARNING:
Do not at any time
make any adjustment to the lawn mower
without rst stopping the motor, removing
the battery pack, and waiting until the
blade has stopped rotating.
WARNING:
Keep your feet away
from the deck when adjusting its height.
The mower can be set to 7 cutting
heights between 1-1/4'' (35mm) and
4'' (105mm). Choose the proper cutting
height according to the type and condition of the grass to be cut.
1. Use one hand hold the aluminum side rails for stability and use the other hand to
move the spring-loaded cutting-height-adjustment lever outwards from the slots
in the cutting-height indication plate.
2. Move the spring-loaded cutting-height-adjustment lever toward the back of the
mower for higher grass-cutting height; move it toward the front of the mower for
lower grass-cutting height.
3. Once arriving at the desired cutting-height position, engage the spring-loaded
cutting-height-adjustment lever back into the slot.
2
1
12
Spring-Loaded Cutting-Height Adjustment
Cutting-Height
Indication Plate