Operator's Manual

56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC 41
INSTALLING THE BLADE
NOTICE:
To re-install or replace the blade(s), be sure to replace the parts in the exact
order in which they were removed, especially ensuring that the words “THIS SIDE
FACING DECK” on upper blade is facing the mower deck and “THIS SIDE FACING
GRASS” on lower blade is facing you.
1. Wear protective gloves.
2. Insert the two saved "Blade Set"
bolts that removed during blade
removing into the sharpened or
new upper blade from the side that
stating" THIS SIDE FACING DECK"
and then mount the upper blade
onto the motor shaft (Fig. 27).
NOTICE: The diamond protrusion on the
"Blade Set" bolts should be aligned with
the rhombic hole in the upper blade
(Fig. 28).
3. Depending on the cut desired,
mount the lower blade chosen
onto the motor shaft. Fig. 29 is
illustrating EGO Edge Premium
Bagging Lower Blade mounting.
THIS SIDE FACING GRASS
29
EGO Edge Premium Bagging Lower Blade
Upper Blade
28
Rhombic Hole in
Upper Blade
Diamond
Protrusion on
“Blade Set” Bolts
27
Upper Blade
“Blade
Set” Bolts
Fan