Operator's Manual

56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC 33
MOWER OVERLOAD PROTECTION
To prevent overload conditions, do not try to remove too much grass at one time. Slow
down your cutting pace or raise the cut height.
Your mower has built-in overload circuit protection. When the mower is overloaded, the
motor will stop and the power indicator on the mower will ash orange. Remove the
battery pack from the mower. Check to see if grass has collected beneath the deck and
clear it if necessary, then install the battery and restart the mower.
BATTERY HIGH-TEMPERATURE PROTECTION
The battery pack will generate heat during operation. The heat dissipates more
slowly in hot weather. If the battery temperature exceeds 158°F (70°C) during
operation, the protection circuit will immediately turn off the mower to protect the
battery pack from heat damage. The mower-status indicator on the mower will off,
the LED on the battery(BA1120, BA1120-FC, BA1400, BA1400-FC, BA2240, BA2240-
FC, BA2800, BA2800-FC, BA4200, BA4200-FC) will ash orange and the LED on
the battery(BA1400T, BA1400T-FC, BA2800T, BA2800T-FC, BA4200T, BA4200T-FC,
BA5600T, BA5600T-FC) will shine red.
Release the bail switch, wait until the battery pack cools down to approximately 152°F
(67°C), then restart the mower.