MSDS

indicated in Section 7)
P405: Store locked up. P410: Protect from sunlight.
P410: Protect from sunlight.
Disposal
P406: Store any spilled/leaking electrolyte material in a corrosive resistant container
with a resistant inner liner.
P501: Dispose of batteries in accordance with applicable hazardous waste
regulations.
Other Hazards
Appearance, Color and Odor: Solid object with no odor.
Primary Route(s) of Exposure: These chemicals are contained in a sealed enclosure. Risk of exposure
occurs only if the cell or pack is mechanically, thermally, electrically or physically abused to the point of
compromising the enclosure.
If this occurs, exposure to the electrolyte solution contained within can occur by inhalation, ingestion, eye
contact and skin contact.
Potential Health Effect(s):
Acute (short term): see Section 8 for exposure controls.
In the event that this cell or pack has been ruptured, the electrolyte solution contained within the cell would be
corrosive and can cause burns to skin and eyes.
Inhalation: Inhalation of materials from a sealed cell is not an expected route of exposure. Vapors or mists
from a ruptured cell may cause respiratory irritation.
Ingestion: Swallowing of materials from a sealed cell is not an expected route of exposure. Swallowing the
contents of an open cell can cause serious chemical burns to mouth, esophagus, and gastrointestinal tract.
Skin: Contact between the cell and skin will not cause any harm. Skin contact with the contents of an open
cell can cause severe irritation or burns to the skin.
Eye: Contact between the cell and the eye will not cause any harm. Eye contact with the contents of an open
cell can cause severe irritation or burns to the eye.
CHRONIC (long term): see Section 11 for additional toxicological data.
Interactions with other chemicals: Immersion in high conductivity liquids may cause corrosion and
breaching of the cell or battery enclosure. The electrolyte solution inside of the cells may react with alkaline
(basic) materials and present a flammability hazard.
Potential Environmental Effects: Not Available.
3. Composition/information on ingredients
The battery pack contains different quantity battery cells in it depending on the battery pack capacity.
Battery Pack Model Number
Quantity of the Battery Cells
BA4200T
42
Below mass range in the last column represents the content of ingredients in one battery cell.
Hazardous
components
Chemical Name
CAS No.
*Mass range in cell
(g/g %)
Electrolyte
Contains Electrolyte salt and
solvents.
5-20