Use and Care Guide

56-VOLT LITHIUM-ION CORDLESS MOWER — LM2020SP/LM2020SP-FC/LM2020/LM2020-FC 43

REPLACING THE TRAILING SHIELD

WARNING:

Always remove the battery pack when servicing or transporting the

mower.

WARNING:

Never operate the mower unless the trailing shield is in place and

working. Never operate the mower with damaged safety devices. Failure to do so can

result in personal injury. The trailing shield is subject to wear and damage, which could

expose moving parts or allow objects to be thrown. For safety protection, frequently

check the trailing shield and replace it immediately with only the identical replacement

part, listed in this manual.

1. Remove the battery.

2. Turn the mower on its side with the upper surface against a wall.

3. Remove the rear wheel on the top side, following the section “REPLACING THE

WHEELS” in this manual.

4. For self propel mower LM2020SP/

LM2020SP-FC, loosen the wheel

cover locking screw, then remove

the wheel cover from the wheel axle

(Fig. 33).

5. Repeat steps 1 to 3 above to

remove the other rear wheel

and wheel cover (LM2020SP/

LM2020SP-FC only).

Wheel Axle

Wheel Cover

Locking Screw