Use and Care Guide

56-VOLT LITHIUM-ION CORDLESS MOWER — LM2020SP/LM2020SP-FC/LM2020/LM2020-FC36
2. Mount the fan and the inner ange
onto the motor shaft with the fan
blade towards the deck (Fig. 25).
3. While wearing protective gloves,
position the blade on the inner
ange with the surface stating
“THIS SIDE FACING GRASS” facing
toward the outside (Fig. 26).
4. Align the outer ange with the shaft
and assemble it in place.
5. Mount the bolt into the shaft
and turn it clockwise by hand to
pre-tighten it.
6. While still wearing protective gloves,
hold the blade with one hand and
turn the fan with the other hand to
align the holes in the blade with the
through holes in the inner ange
(Fig. 27).
25
Fan blade
Inner ange
Fan
THIS SIDE FACING GRASS
27
Align the holes
26
THIS SIDE FACING GRASS