Use and Care Guide

56-VOLT LITHIUM-ION CORDLESS MOWER — LM2020SP/LM2020SP-FC/LM2020/LM2020-FC 35

3. While wearing protective gloves, place a metal rod (e.g., a 3.5'' length screw bit)

with diameter less than 5/16'' (8mm) into the xing hole to act as a stabilizer.

NOTICE: If the bolt rotates with the

motor shaft when loosening the bolt, turn

the fan by hand to align the through holes

in the fan with the holes in the blade,

and place another metal rod (e.g., a 3.5''

length screw bit) with diameter less than

1/4'' (6.35mm) into the aligned holes to

act as another stabilizer (Fig. 22).

4. Use a 9/16'' (14mm) wrench to turn

the blade bolt counterclockwise to

loosen it.

5. Continue using the 9/16'' (14mm)

wrench to turn the blade bolt

counterclockwise to loosen it

completely.

6. While wearing protective gloves,

remove the bolt, outer ange and

the blade (Fig. 23).

INSTALLING THE BLADE

WARNING:

Always protect your

hands by wearing heavy gloves or

wrapping the cutting edges with rags

or other materials when performing any

maintenance on the mower blade.

Always remove the battery pack when

servicing or transporting the mower.

NOTICE: To re-install or replace the blade,

be sure to replace the parts in the exact order in which they were removed (Fig. 23).

1. Mount the inner ange to the fan (Fig. 24).

Loosen

THIS SIDE FACING GRASS

Stabilizer 2

Stabilizer 1

Fan

Inner ange

BoltOuter ange

Blade

THIS SIDE FACING GRASS