Use and Care Guide

56-VOLT LITHIUM-ION CORDLESS MOWER — LM2020SP/LM2020SP-FC/LM2020/LM2020-FC 25

ADJUSTING THE

CUTTING-HEIGHT (Fig. 12)

WARNING:

Do not at any time

make any adjustment to the lawn mower

without rst stopping the motor, removing

the battery pack and waiting for the blade

to stop rotating.

WARNING:

Keep your feet away

from the deck when adjusting its height.

The mower can be set to 6 cutting heights between 1-3/16'' (30mm) and 4'' (100mm).

Choose the proper cutting height according to the type and condition of the grass.

1. Use one hand to hold the right handle tube for stability, and use the other hand to

move the cutting-height adjustment lever outwards from the slots in the cutting-

height indication plate.

2. Move the cutting-height adjustment lever toward the back of the mower for a

higher cutting height; move it toward the front of the mower for a lower cutting

height.

3. Once arriving at the desired cutting-height position, engage the cutting-height

adjustment lever back into the slot.

TO ATTACH/DETACH THE

BATTERY PACK (Fig. 13)

CHARGE BEFORE FIRST USE.

WARNING:

If any parts are broken

or missing, do not attempt to attach the

battery pack to the mower or operate the

mower until the broken or missing parts

are replaced. Failure to do so could result

in serious injury.

1. The battery cover is hinged. Raise the battery cover by lifting the front of the

cover.

Cutting-Height

Adjustment Lever

Cutting-Height

Indication Plate

Battery-Release

Button

Battery-Pack Cover