Use and Care Manual

56-VOLT LITHIUM-ION CORDLESS MOWER — LM2000-S/LM2000-S-FC 39
REPLACING THE WHEELS
(Fig. 31)
WARNING:
Always remove
the safety key and battery pack when
servicing or transporting the mower.
1. Use a at blade screwdriver to pry
the dust cover away from the wheel.
2. Use an adjustable or 1/2 inch
(13mm) wrench to turn the bolt
counterclockwise to loosen it.
3. Remove the bolt, the worn wheel and the wave washer from the wheel axle.
4. Mount the wave washer and the new wheel on the wheel axle. Note that the
round recess must face outward.
5. Lock the wheel with the bolt by tightening the bolt clockwise.
6. Mount the dust cover onto the wheel and press it in place.
STORING THE MOWER
The following steps should be taken in order to prepare the lawn mower for storage.
1. Remove the battery pack from the mower and store it in a cool, dry location.
2. Remove the safety key from the slot.
3. Clean the mower as described in the previous section.
4. Inspect the blade and replace it or sharpen it if required.
5. Lubricate the mower.
6. Store the mower in a dry, clean location. Do not store it next to corrosive
materials, such as fertilizer or rock salt.
7. Store the mower in a covered, enclosed space, that is cool and dry and out of the
reach of children.
8. Do not cover the lawn mower with a solid plastic sheet. Plastic coverings trap
moisture around the mower, which causes rust and corrosion.
31
Round recess
facing out
Wheel Axle
Wheel
Bolt
Wave
Washer
Dust
Cover