Use and Care Manual

56-VOLT LITHIUM-ION CORDLESS MOWER — LM2000-S/LM2000-S-FC38

REPLACING THE TRAILING SHIELD

WARNING:

Always remove the safety key and battery pack when servicing or

transporting the mower.

WARNING:

Never operate the mower unless the trailing shield is in place and

working. Never operate the mower with damaged safety devices. Failure to do so can

result in personal injury.

The trailing shield is subject to wear and damage, which could expose moving parts

or allow objects to be thrown. For safety protection, frequently check the trailing shield

and replace it immediately with only the identical replacement part, listed in this

manual.

1. To remove the trailing shield, release the bail switch to stop the mower. Remove

the battery pack and safety key.

2. Turn the mower on its side.

3. Remove the four screws with a

Phillips screwdriver; remove the

press bar (Fig. 30).

4. Replace with a new trailing shield

and reattach it with the press bar

and screws.

Trailing

Shield

Press

Bar

Screws