Use and Care Manual

56-VOLT LITHIUM-ION CORDLESS MOWER — LM2000-S/LM2000-S-FC34

INSTALLING THE BLADE

WARNING:

Always protect your hands by wearing heavy gloves or wrapping

the cutting edges with rags or other materials when performing any maintenance on

the mower blade. Always remove the safety key and battery pack when servicing or

transporting the mower.

NOTICE: To re-install or replace the blade, be sure to replace the parts in the exact

order in which they were removed (Fig. 23).

1. Align the fan and the inner ange with

the shaft and assemble them in place.

2. While wearing protective gloves,

position the blade on the inner

ange with the recess toward the

mower (as shown in Fig. 24).

3. Align the outer ange with the shaft

and assemble it in place.

4. While still wearing protective gloves,

rotate the blade by hand to align the

round hole in the blade with the round

hole in the inner ange (Fig. 25).

5. Place a metal rod (e.g., a manual

screwdriver) with diameter less than

1/4 inch (6.35mm) into the aligned

holes to act as a stabilizer. Place

another metal rod (e.g., a manual

screwdriver) with diameter less than

7/16 inch (11mm) into the xing

hole to act as another stabilizer.

6. Mount the bolt into the shaft, and turn it clockwise by hand to pre-tighten it.

Recess

Align the two

round holes