Use and Care Manual

56-VOLT LITHIUM-ION CORDLESS MOWER — LM2000-S/LM2000-S-FC 33
3. While wearing protective gloves,
place a metal rod(e.g., a manual
screwdriver) with diameter less than
7/16 inch (11mm) into the xing
hole to act as a stabilizer (Fig. 21).
4. Use a 9/16 inch (14mm) wrench to
turn the blade bolt counterclockwise
to loosen it.
NOTICE: If the bolt rotates with the
motor shaft when loosing the bolt, rotate
the bolt to align the round hole in the
inner ange with the round hole in the
blade, place another metal rod(e.g., a
manual screwdriver) with diameter less
than 1/4 inch (6.35mm) into the aligned
holes to act as another stabilizer (Fig. 22).
5. Continue using the 9/16 inch
(14mm) wrench to turn the blade
bolt counterclockwise to loosen it
completely.
6. While wearing protective gloves,
remove the bolt, outer ange and the
blade (Fig. 23).
21
Loosen
22
Loosen
23
Fan
Inner ange
Bolt
Outer ange
Blade