Use and Care Manual

56-VOLT LITHIUM-ION CORDLESS MOWER — LM2000-S/LM2000-S-FC 27

To start the mower

1. Attach the battery pack to the mower and close the battery cover.

NOTICE: Make sure that the latch on the mower snaps into place and that the battery

pack is secured to the mower before operation.

2. Insert the safety key into the slot and then depress the safety key (Fig. 14 &15).

3. With the safety key depressed, pull the bail switch upward to the handle and

release the safety key (Fig. 15).

4. The mower will start.

To stop the mower

1. Release the bail switch (Fig. 16).

2. The electric brake in the Automatic Braking Mechanism will stop the blade

rotation within 3 seconds of the bail switch release.

LED WORK LIGHTS (Fig. 17)

The LED work lights are located on the

front of the battery compartment.

To turn on the lights, press the switch

button (Fig. 18). The work lights provide

bright light in front of the mower.

To turn off the work lights, press the

switch button again.

LED Work Lights