Use and Care Manual

56-VOLT LITHIUM-ION CORDLESS MOWER — LM2000-S/LM2000-S-FC 23
ATTACHING/REMOVING THE SIDE
DISCHARGE CHUTE
(Fig. 11a & b)
WARNING:
Do not at any time
make any adjustment to the lawn mower
without rst stopping the motor and
removing the safety key.
1. Lift the rear discharge door.
2. Align the lower edge of the
discharge with the V-slot of the
doorsill and insert it into the slot.
3. Push the top of the discharge and
insert it into the mower. Check to
see that it is securely seated in the
deck.
4. To remove the side discharge chute,
lift the rear discharge door, grasp
the side discharge chute and pull it
out.
5. Release the discharge door and make sure that it rests rmly against the
discharge chute.
11a
V-Slot
11b
Step 1
Step 2