Use and Care Manual
56-VOLT LITHIUM-ION CORDLESS MOWER — LM2000-S/LM2000-S-FC20
3. UPPER OPERATING POSITION: Lift
the handle with your left hand.
Gently pivot the handle backward
until you hear and feel the lock
pin engage in the Upper Operating
Position. Fully extend the side rails
and securely close the two handle-
locking clamps (Fig. 7 & 8). Taller
users may prefer this position.
4. LOWER OPERATING POSITION: Press
and hold the quick-adjust lever with
your left hand to release the handle
from the upper operating position.
Begin to lower the handle with
your right hand, and then release
the lever. Gently pivot the handle
downward until you hear and feel
the lock pin engage in the Lower
Operating Position. Fully extend the
side rails and securely close the two
handle-locking clamps (Fig. 7 & 8).
NOTE: The motor cannot be started
unless:
a) the side rails are fully extended
b) both green handle-locking clamps are securely closed
c) the handle is locked into one of the two operating positions
7
Indication
Line
8