User Manual

REMOTE CONTROL
With the IR remote, you can operate the laser easy and you have many functions.
To control the fixture you must aim the remote at the front of the fixture and be no more
than 30 feet away.
1. Power On/Off
2. Auto mode
3. Sound active mode
FRONT AND REAR PANEL
Number
Name
Function
1
Laser aperture
Laser output, do not look directly into this aperture.
2
Remote Receiver
IR remote receiver
3
Power switch
On/ Off
4
Power in
AC 100~240V IEC power input
5
Key switch
Key switch for laser output
6
Interlock
Laser output is available only when the interlock is connected. It could be used to connect a
laser emergency switch.
7
Display
Menu for setting mode
8
DMX
DMX in/out 3 pin XLR interface
9
Mic sensitivity
Adjust sound sensitivity from minimum to maximum.