40 8001 1.
1 Table of contents EGO CUP 1 Table of contents _______________________________________________________ 2 Introduction / Foreword 3 Safety instructions 2 __________________________________________________ 3 ______________________________________________________ 4 4 Scope of supply / Packaging contents ________________________________________ 5 5 Connection / Assembly ___________________________________________________ 6 6 Function test ___________________________________________________
2 Introduction / Foreword Congratulations on your new EGO! EGO CUP is the clever beginners' solution for using your telephone in your vehicle: easy to operate, noble and compact. Installing the EGO CUP in the vehicle requires no special knowledge and skills. Simply place the EGO CUP on the adapter, engage with this while turning clockwise and finally insert into the cupholder while turning clockwise. Please ensure that your telephone is compatible with the EGO CUP. Ask your dealer, if necessary.
3 Safety instructions 1. Improper installation — Improper installation can cause damage to the device or vehicle! Only use EGO CUP in the cupholder! 2. Risk of injury — Installing the device in inappropriate positions may cause injuries in a road accident or render safety devices ineffective. Only use EGO CUP in the cupholder! 3. Risk of injury / Material damage — Do not apply any direct pressure on the connection cable! 4.
4 Scope of supply / Packaging contents [1] EGO CUP [2] Adapter for use in the cupholder [3] [4] Microphone Connection kit for connection to the vehicle cigarette lighter (12 V) [5] Quick Guide [6] Safety instructions [1] [4] [3] Only the connection kit included in the scope of supply (Funkwerk Dabendorf, model: R0002037) is to be used. [2] [5] [6] Ill.: Scope of supply  PLEASE ENSURE the completeness of the delivery. If parts are missing, please contact our service hotline: 858.566.2170, Mo.
5 Connection/Assembly Connection Assembly Step 1 Step 2 Microphone connection Adapter connection for cigarette lighter Step 3 The assembled system is to be inserted in the cupholder of the vehicle by turning in a clockwise direction. 6 Funktion test The function test cannot be carried out until the system has been connected to a compatible Bluetooth® mobile phone. Please consult the “Putting into operation“ section further back in this instruction manual for details of the procedure.
Operating instructions  NEGATIVE IMPACT ON DRIVING SAFETY! Inattentiveness can lead to dangerous traffic situations. Even when calling in handsfree mode, it is important to always focus your attention on what is happening around you. When navigating in difficult situations, try to avoid carrying out a phone conversation at all! 7.1 Functions 7.1.1 Function overview The EGO CUP handsfree system supports the Bluetooth® handsfree profile.
LED – functions An LED is integrated in the EGO CUP. This is used to display various states. The following states may occur. LED – state with inactive Bluetooth ®- connection - LED flashes in intervals shortly Æ No mobile phone connected LED – state with active Bluetooth ®- connection - LED permanently on Æ Mobile phone connected, network reception exists - LED quickly flashes in intervals Æ Active call - LED off Æ No network reception 7.
7.3.2 Switching on/off When the ignition is switched on or the connection kit is plugged in, the handsfree system switches on and the LED slowly flashes four times. Then the EGO CUP is in standby mode and ready to establish a connection. A compatible Bluetooth® telephone must be connected to the EGO CUP in order to be able to telephone with the system. You will learn how to do this in the following sections.
7.4 Calls 7.4.1 Incoming call The ringtone can be heard for an incoming call. In addition, the LED flashes periodically. The call can be accepted using the button. The call is rejected using the button. 7.4.2 Outgoing call There are multiple options for beginning a call. The telephone's redial is activated using the button, in which the number last dialled is dialled again. If the call is established, the LED flashes periodically.
Troubleshooting: Cause Remedy Mini - USB not connected Connect mini - USB Connection kit not connected Connect connection kit Ignition not switched on Switch on ignition Microphone not connected Connect microphone Microphone in airstream Decrease ventilation Telephone very close to EGO CUP parts or car radio Increase the distance between the phone and the EGO CUP or radio The person on the other end complains of echo effects Volume too high Lower volume When pairing the device, the mobile p
8 Technical specifications EGO CUP dimensions 76 mm x 74 mm x 43,5 mm Length of adapter cable 0,6 m Operating voltage 12 V Temperature range -10 °C to +55 °C Supported Bluetooth® profiles Handsfree 9 Certification 0681 In accordance with R&TTE Directive 1999/5/EC 03 5156 Model certification according to EU Directive 72/245/EEC (2006/28/EC) „Radio interference (electromagnetic compatibility) of vehicles“ Bluetooth® is a registered trademark of Bluetooth SIG, Inc.
10 Conformity statement This device works with Bluetooth® radio technology. In certain countries the use of this device may not be allowed or may be restricted. Please familiarise yourself with these restrictions and do not use the device if you are unsure whether usage is allowed in a certain country. Bluetooth® is trademark of Bluetooth SIG, Inc.
FCC statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Â NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
11 Hotline Do you have questions or suggestions? Would you like more information? Do you require on-site consulting and service? Give us a call! Our hotline is available to you at the following times: Monday – Friday from 8.00 AM to 5.00 PM Please follow the steps below: Æ Check whether you can solve the problem using the "Troubleshooting" section. Æ Please have the model of the handsfree system at hand. Æ Try to describe the problem as accurately as possible.
Raytel Corporation A partner of Funkwerk Dabendorf GmbH 8820 Kenamar Drive, Ste 506 San Diego, CA 92121 Telephone 858.566.2159 Fax 858.566.2179 eMail support@egohandsfree.com Internet www.egohandsfree.com A Funkwerk AG company.
