User`s manual

This setup is compatible with most standard setups. Should you have some specialized needs,
the following paragraphs should provide the information you need.
The M4 “reads” the DIP switch positions only on power up. Whenever a change is made to any
dip switch, the MOD50 must be powered off and back on to “read” the change.
DIP SWITCH SETTINGS:
Using a pen or similar pointy device, move the eight small switches ON or OFF according to your
specific needs. See below for the switch functions.
S1 through S4 are used to set the midi channel (1 -16) that the MOD100 will receive data on. See
the chart below.
CHAN.
S1
S2
S3
S4
1
OFF
OFF
OFF
OFF
2
ON
OFF
OFF
OFF
3
OFF
ON
OFF
OFF
4
ON
ON
OFF
OFF
5
OFF
OFF
ON
OFF
6
ON
OFF
ON
OFF
7
OFF
ON
ON
OFF
8
ON
ON
ON
OFF
9
OFF
OFF
OFF
ON
10
ON
OFF
OFF
ON
11
OFF
ON
OFF
ON
12
ON
ON
OFF
ON
13
OFF
OFF
ON
ON
14
ON
OFF
ON
ON
15
OFF
ON
ON
ON
16
ON
ON
ON
ON
PAGE 7