Owner`s manual
INPUT: There is one instrument input on
the far right. Plug your guitar in here.
TIGHT SWITCH: This switch alters the
very low bass response at the input to the
preamp. The down position keeps the
low bass response intact and is ideal
for a full bodied, clean sound. In the up
to prevent the bass from getting loose or
gain or distortion.
BRIGHT SWITCH:
the UP position, the high end is boosted
for added clarity and sparkle. The down
position creates a more neutral tone. Ex-
periment using a combination of both the
GAIN:
for the cleanest tones. Be aware there is
You can easily push the Rebel-20 into
serious high gain territory for surprisingly
heavy crunch or searing solo tones just by
TREBLE, MIDDLE AND BASS: The
-
ful but very familiar set of tone controls.
You will immediately hear the decidedly
British character with a tight low end and
midrange growl found in many famous
MASTER:
control that simply adjusts the overall
loudness of the amp and also controls the
amount of guitar signal that gets sent to
the power amp. The higher you set the
and compression you will hear.
WATTS:
knob allows you to adjust the power output
there is a lot of interaction between the
will impress you with its ability to hang
with the “big guys”.
TUBE MIX: This knob does a really great
thing, too. Inside the Rebel 20 are two
independent pairs of power tubes. One pair
tone with a strong midrange growl. The
-
er tubes which are a smoother sounding,
feel the distinctly different “vibe” of the
two pairs of tubes. The best part is being
able to actually mix the two pairs in any
ratio you like. Setting the knob straight up
continuously variable knob, you can now
experience all the subtle shades of tone
that can only be found with this exclusive
Egnater feature.
BIG TOGGLE SWITCH: DOWN IS
THE STANDBY MODE
you should always have the switch in the
mode during breaks to keep it warmed up
and ready to play.
THE OTHER BIG TOGGLE SWITCH:
Turns the power on and off. Up is ON.
Down is the mode.
QUICK START GUIDE
7










