User's Manual

EWB160031M User manual
Proprietary & Confidential Information Egis Technology Inc.
Doc. NO:
After command is input, APS serial-port lists out all of missions that are currently carried out.
Figure 11:TRACER Command
The user-created tasks are listed in the Start of App Tasks project, and with the example of
user_app_demo task, it is created by users in the main procedure with index of 32, while 0x07
denotes
that printing all the logs of the task, so if users need to close the log output of the task. ,
command of “Tracer level 32 0x00” can be input in APS serial-port, which can also be applied in
the log management of other tasks.
Note: The premise for using this method is that the user needs to enable the input function of the
APS
serial-port when the main program is initialized, otherwise the input becomes invalid.
At the same time, when the configuration loses power, it needs to be reconfigured when it is
powered on next.